Special machine for tool case
Production Description:
It is the most famous series with the highest popularity. It is famous for its well-known to many customers over the world for its excellence, pragmatic, classic. Clamping system adopts two-tie-bar type clamping device with gears and racks synchrously aligned; Cylinder clamps mold by direct pressure; It adopts one-piece mold platen with X-shaped pull arms to increase the bearing rigidity of mold platen; the bevel angle of pull arms is 45°, which makes a large mold area; The extrusion system adopts frequency control of motor speed, and the amount of extrusion is large; It adopts PLC programmable controller made by Panasonic of Japan, of which programs are optimized; All electric equipments adopt world-famous products.
Machine Features:
It is mainly applied to produce single layer plastic container, auto parts and other plastic products with a volume under 60L. It adopts modular design and has functions of remote monitoring and diagnosis.
HC90
技术参数(Technical parameter)
●最大制品容积(Max.volume of products)------------------------------------------------------------------60L
●挤出装置(Extrusion)
螺杆直径(Screw diameter)----------------------------------------------------------------------90mm
螺杆长径比(Screw length/Dia.ratio)----------------------------------------------------------25：1
塑化能力(Plasticizing capacity)---------------------------------------------------150 kg/h（HDPE）
机筒加热功率(Heating power)-------------------------------------------------------------------25kw
绞料电机功率(Driving power)-------------------------------------------------------------------45 kw
●模头装置(Clamping system)
最大口模直径(Max die dia.)--------------------------------------------------------------------350mm
模头加热功率(Die head heating power)-------------------------------------------------------20KW
储料缸容积(Accumulation volume)--------------------------------------------------6L(8LOptional)
●合模装置(Clamping system)
模板最大平面尺寸(宽×高)(Platen dimensions(W×H)-------------------------------900x800mm
合模力(Clamping force)-------------------------------------------------------------------------270KN
模板开距(Platen opening stroke Max.)-------------------------------------------------400-1050mm
最大开合模速度(Max. clamping speed)(空循环Idle cycle)-----------------------------600PC/H
模具尺寸(Mold dimension)（宽×高 WxH）----------------------------------------700X1000mm
模具厚度(Mold thickness)----------------------------------------------------------------405－600mm
●液压系统(Hydraulic system)
小泵small pump-----------------------------------------------------------------------------------16 MPa
大泵big pump--------------------------------------------------------------------------------------12 MPa
●泵油系统Hydraulic pump system
油泵电机功率Motor power of oil pump---------------------------------------------------------30KW
壁厚电机功率Motor power of parison thickness------------------------------------------------4KW
●电源(Electrical power)
电压(Power voltage)----------------------------------------------------------------------------AC380V
频率(Frequency)--------------------------------------------------------------------------------------50Hz
线制(Connecting cable)-------------------------------三相四线制(Three phase four wire system)
●总额定功率(Total rated power) --------------------------------------------------------------------------124kw
*
Prev：No Prev
Next：No Next
