Special machine for high barrier bottle
The main purpose of multilayer blow moulding machine is to solve the necessary trend which use of certain material alone cannot reach products of the condensation physical properties (such as heat resistance, air tightness and mechanical strength, etc.) requirements. This machine specially suitable for high-barrier pesticide bottle of mass production, the maximum volume of the product is 1 liter. Single, double and triple die heads are all available, and the parts of die heads are made from alloy steel.
Model Specification:
Model
Screw dia. (mm)
Plasticizing Capacity (KG/H)
Clamping force (KN)
Max. Volume of Product (L)
HW50R-III
50/30/30
50/8/8
50
1
HW60R-III
60/35/35
80/10/10
80
2.5
HW70R-III
70/40/40
110
100
3.5
HW50R-III Specification
1. Max. volume of product……………………1L
2. Extrusion system
Screw diameter(outer/middle/inner)……………………50/30/30mm
Screw L/D……………………27:1/25:1/25:1
Plasticizing Capacity……………………50/8/8kg/h
Barrel heating zones……………………3/3/3
Motor power……………………15/4/4kw
3. Clamping system
Platen dimension(W×H)……………………315×350mm
Clamping force……………………50kn
Mold platen opening stroke……………………80-330mm
4. Pneumatic system
Air supply pressure……………………0.7mpa
Work pressure……………………0.6mpa
Air consumption……………………0.4m3/min
5. Water supply pressure
Water supply pressure……………………0.2-0.3mpa
6. Power supply
Voltage……………………AC380V 10%
Frequency……………………50Hz
Wairing cable……………………Three phase four wire
Total rated power……………………50kw
Average consumption……………………26kw/h
7. Machine weight……………………5.5ton
8. Machine dimension(L×W×H)……………………3.1×2.2×2.4m
HW60R-III Specification
1. Max. volume of product……………………2.5L
2. Extrusion system
Screw diameter(outer/middle/inner)……………………60/35/35mm
Screw L/D……………………27:1/25:1/25:1
Plasticizing Capacity……………………80/10/10kg/h
Barrel heating zones……………………3/3/3
Motor power……………………18/5.5/5.5kw
3. Clamping system
Platen dimension(W×H)……………………380×450mm
Clamping force……………………80kn
Mold platen opening stroke……………………80-330mm
4. Pneumatic system
Air supply pressure……………………0.7mpa
Work pressure……………………0.6mpa
Air consumption……………………0.4m3/min
5. Water supply pressure
Water supply pressure……………………0.2-0.3mpa
6. Power supply
Voltage……………………AC380V 10%
Frequency……………………50Hz
Wairing cable……………………Three phase four wire
Total rated power……………………75kw
Average consumption……………………37kw/h
7. Machine weight……………………6.5ton
8. Machine dimension(L×W×H)……………………3.5×2.2×2.6m
HW70R-III Specification
1. Max. volume of product……………………3.5L
2. Extrusion system
Screw diameter(outer/middle/inner)……………………70/40/40mm
Screw L/D……………………27:1/25:1/25:1
Plasticizing Capacity……………………110/15/15kg/h
Barrel heating zones……………………3/3/3
Motor power……………………30/7.5/7.5kw
3. Clamping system
Platen dimension(W×H)……………………385×500mm
Clamping force……………………100kn
Mold platen opening stroke……………………250mm
4. Pneumatic system
Air supply pressure……………………0.7mpa
Work pressure……………………0.6mpa
Air consumption……………………0.4m3/min
5. Water supply pressure
Water supply pressure……………………0.2-0.3mpa
6. Power supply
Voltage……………………AC380V 10%
Frequency……………………50Hz
Wairing cable……………………Three phase four wire
Total rated power……………………95kw
Average consumption……………………50kw/h
7. Machine weight……………………8ton
8. Machine dimension(L×W×H)……………………3.5×2.2×2.8m
Note: The data in list is just for reference.
*
Prev：No Prev
Next：No Next
